You are here: Home > Equipment > Food Holding/Serving > Drop-In Cold Food Units
Sort By:
Page of 1
Cold Food Pan, 1 Pan Drop-In, Refrigerated, CWB-1 by Hatco. Cold Food Pan, 2 Pan Drop-In, Refrigerated, CWB-2 by Hatco. Cold Food Pan, 3 Pan Drop-In, Refrigerated, CWB-3 by Hatco.

Hatco - Cold Food Pan, 1 Pan Drop-In, Refrigerated - CWB-1


    From back or front of the house, the Hatco Refrigerated Drop-In Well is ideal for your buffets, salad bars, cold food displays, or anywhere else a refrigerated well is required.


  • Unique top angled inside wall design allows cold air to effectively blanket your food product to keep the food optimally cold and fresh
  • Electronic control assembly can be conveniently mounted to either side of the condensing unit or remotely mounted up to four feet from the unit
  • Adjustable condensing unit can be rotated 90 or 180 for easy venting adjustments and flexibility at installation
  • Easy serviceability with a site glass, service valves, dryer/filter and receiver. Long flexible refrigerant line provides the ability to pull-out the condensing unit for service
  • 1" drain simplifies cleaning.
  • Auto-defrost is activated through an advanced electronic controller programmed at customer location
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 17.13" to 18.5" wide x 25.19" to 26.5" deep x 25 1/2" below counter
  • 19" wide x 27" long x 25 1/2" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional food pans, divider bars, wire trivets and false bottom plates are sold separately

Hatco - Cold Food Pan, 2 Pan Drop-In, Refrigerated - CWB-2


    From back or front of the house, the Hatco Refrigerated Drop-In Well is ideal for your buffets, salad bars, cold food displays, or anywhere else a refrigerated well is required.


  • Unique top angled inside wall design allows cold air to effectively blanket your food product to keep the food optimally cold and fresh
  • Electronic control assembly can be conveniently mounted to either side of the condensing unit or remotely mounted up to four feet from the unit
  • Adjustable condensing unit can be rotated 90 or 180 for easy venting adjustments and flexibility at installation
  • Easy serviceability with a site glass, service valves, dryer/filter and receiver. Long flexible refrigerant line provides the ability to pull-out the condensing unit for service
  • 1" drain simplifies cleaning.
  • Auto-defrost is activated through an advanced electronic controller programmed at customer location
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 30.13" to 31.5" wide x 25.19" to 26.5" deep x 25 1/2" below counter
  • 32" wide x 27" long x 25 1/2" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional food pans, divider bars, wire trivets and false bottom plates are sold separately

Hatco - Cold Food Pan, 3 Pan Drop-In, Refrigerated - CWB-3


    From back or front of the house, the Hatco Refrigerated Drop-In Well is ideal for your buffets, salad bars, cold food displays, or anywhere else a refrigerated well is required.


  • Unique top angled inside wall design allows cold air to effectively blanket your food product to keep the food optimally cold and fresh
  • Electronic control assembly can be conveniently mounted to either side of the condensing unit or remotely mounted up to four feet from the unit
  • Adjustable condensing unit can be rotated 90 or 180 for easy venting adjustments and flexibility at installation
  • Easy serviceability with a site glass, service valves, dryer/filter and receiver. Long flexible refrigerant line provides the ability to pull-out the condensing unit for service
  • 1" drain simplifies cleaning.
  • Auto-defrost is activated through an advanced electronic controller programmed at customer location
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 43.13" to 44.5" wide x 25.19" to 26.5" deep x 25 1/2" below counter
  • 45" wide x 27" long x 25 1/2" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional food pans, divider bars, wire trivets and false bottom plates are sold separately
Cold Food Pan, 4 Pan Drop-In, Refrigerated, CWB-4 by Hatco. Cold Food Pan, 5 Pan Drop-In, Refrigerated, CWB-5 by Hatco. Cold Food Pan, 6 Pan Drop-In, Refrigerated, CWB-6 by Hatco.

Hatco - Cold Food Pan, 4 Pan Drop-In, Refrigerated - CWB-4


    From back or front of the house, the Hatco Refrigerated Drop-In Well is ideal for your buffets, salad bars, cold food displays, or anywhere else a refrigerated well is required.


  • Unique top angled inside wall design allows cold air to effectively blanket your food product to keep the food optimally cold and fresh
  • Electronic control assembly can be conveniently mounted to either side of the condensing unit or remotely mounted up to four feet from the unit
  • Adjustable condensing unit can be rotated 90 or 180 for easy venting adjustments and flexibility at installation
  • Easy serviceability with a site glass, service valves, dryer/filter and receiver. Long flexible refrigerant line provides the ability to pull-out the condensing unit for service
  • 1" drain simplifies cleaning.
  • Auto-defrost is activated through an advanced electronic controller programmed at customer location
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 56.13" to 57.5" wide x 25.19" to 26.5" deep x 25 1/2" below counter
  • 58" wide x 27" long x 25 1/2" high
  • 120V 8.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional food pans, divider bars, wire trivets and false bottom plates are sold separately

Hatco - Cold Food Pan, 5 Pan Drop-In, Refrigerated - CWB-5


    From back or front of the house, the Hatco Refrigerated Drop-In Well is ideal for your buffets, salad bars, cold food displays, or anywhere else a refrigerated well is required.


  • Unique top angled inside wall design allows cold air to effectively blanket your food product to keep the food optimally cold and fresh
  • Electronic control assembly can be conveniently mounted to either side of the condensing unit or remotely mounted up to four feet from the unit
  • Adjustable condensing unit can be rotated 90 or 180 for easy venting adjustments and flexibility at installation
  • Easy serviceability with a site glass, service valves, dryer/filter and receiver. Long flexible refrigerant line provides the ability to pull-out the condensing unit for service
  • 1" drain simplifies cleaning.
  • Auto-defrost is activated through an advanced electronic controller programmed at customer location
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 69.13" to 70.5" wide x 25.19" to 26.5" deep x 25 1/2" below counter
  • 71" wide x 27" long x 25 1/2" high
  • 120V 11.5 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional food pans, divider bars, wire trivets and false bottom plates are sold separately

Hatco - Cold Food Pan, 6 Pan Drop-In, Refrigerated - CWB-6


    From back or front of the house, the Hatco Refrigerated Drop-In Well is ideal for your buffets, salad bars, cold food displays, or anywhere else a refrigerated well is required.


  • Unique top angled inside wall design allows cold air to effectively blanket your food product to keep the food optimally cold and fresh
  • Electronic control assembly can be conveniently mounted to either side of the condensing unit or remotely mounted up to four feet from the unit
  • Adjustable condensing unit can be rotated 90 or 180 for easy venting adjustments and flexibility at installation
  • Easy serviceability with a site glass, service valves, dryer/filter and receiver. Long flexible refrigerant line provides the ability to pull-out the condensing unit for service
  • 1" drain simplifies cleaning.
  • Auto-defrost is activated through an advanced electronic controller programmed at customer location
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 82.13" to 83.5" wide x 25.19" to 26.5" deep x 25 1/2" below counter
  • 84" wide x 27" long x 25 1/2" high
  • 120V 11.5 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional food pans, divider bars, wire trivets and false bottom plates are sold separately
Hot Food Pan, 1 Pan Drop-In, Standard Watt, Insulated With Drain - 120V, HWBI-FULD by Hatco. Refrigerator, Drop-In Frost Top, 1 Bun Pan Size, FTB-1 by Hatco. Refrigerator, Drop-In Frost Top, 2 Bun Pan Size, FTB-2 by Hatco.

Hatco - Hot Food Pan, 1 Pan Drop-In, Standard Watt, Insulated With Drain - 120V - HWBI-FULD


    Hatco Built-In Rectangular Heated Well units hold steam table food hot and fresh with self adjusting thermostats that read the actual temperatures and add heat only when needed. Many others charge extra for this kind of temperature control.


  • Why choose Hatco Insulated Heated Wells? Their fully insulated construction retains heat better, distributing it more evenly to keep food hot and fresh; Faster preheat, Better heat retention and faster recovery, Improved energy efficiency, Solid performance even near refrigerated surfaces, Keeps heat inside well cavity, ensuring cooler surrounding surfaces for customer safety
  • Control features a separate lighted ON/OFF rocker switch and temperature dial, allowing preset temperatures to be maintained. 6' conduit allows for convenient placement.
  • Easy service access to heating elements and thermostats
  • Metal sheathed heating element
  • EZ locking hardware for quick installation with only a screwdriver
  • Top of counter mount. Non combustible counter material is recommended
  • Built-in 1" drain
  • 50% larger drain with flat screen simplifies cleaning and holds pans level.
  • Thicker stainless steel construction and solid brazed joints for durability.
  • Standard wattage unit for faster preheat and quicker heat recovery. Don't be fooled by others selling low wattage units!
  • Full-size Heated Well compartments can house a variety of pans – full-size, half-size or third-size, so that a variety of food products can be showcased. Pans sold separately
  • Bottom access panel makes rare element change-out easy
  • Cutout dimensions: 14" to 14 1/4" wide x 22" to 22 1/4" deep x 9 7/16" below counter
  • 13 3/4" wide x 21 3/4" long x 9 1/2" high
  • 120V 10 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year on-site parts and labor warranty plus on additional year parts on the metal heating element
  • Low and high watt units are also available. Please contact us for details.
  • Optional food pans, divider bars, wire trivets and color control bezels are sold separately. Please contact us for any assistance.

Hatco - Refrigerator, Drop-In Frost Top, 1 Bun Pan Size - FTB-1


    Convenience meets style with this Hatco Drop-In Frost Top. Perfect for quick-turn products on self-serve buffets like snacks, hors d’oeuvres, side dishes, desserts... truly a unit for breakfast, lunch, and dinner. Sturdy construction and easy clean-up while keeping things cool.


  • The Hatco Frost Top units hold full-size sheet pans and other flat-bottom serving containers, helping to keep food products cool and fresh
  • For easy and flexible installation, the condensing unit may be rotated 90 or 180
  • The electronic adjustable temperature control can be mounted to either side of the condensing unit or remotely up to four feet from the unit
  • Accommodates full-size and half-size sheet pans
  • Long, flexible refrigerant line (ability to pullout condensing unit) for service
  • Lighted On/Off rocker switch
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 19.44" to 20.125" wide x 27.44" to 28" deep x 16.75" below counter
  • 21.06" wide x 28.94" long x 17.21" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional bun pans are sold separately

Hatco - Refrigerator, Drop-In Frost Top, 2 Bun Pan Size - FTB-2


    Convenience meets style with this Hatco Drop-In Frost Top. Perfect for quick-turn products on self-serve buffets like snacks, hors d’oeuvres, side dishes, desserts... truly a unit for breakfast, lunch, and dinner. Sturdy construction and easy clean-up while keeping things cool.


  • The Hatco Frost Top units hold full-size sheet pans and other flat-bottom serving containers, helping to keep food products cool and fresh
  • For easy and flexible installation, the condensing unit may be rotated 90 or 180
  • Mobile condensing unit can be movable 3" increments
  • The electronic adjustable temperature control can be mounted to either side of the condensing unit or remotely up to four feet from the unit
  • 1" NPT drain. Drain plumbing to be installed per local codes
  • Accommodates full-size and half-size sheet pans
  • Long, flexible refrigerant line (ability to pullout condensing unit) for service
  • Lighted On/Off rocker switch
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 37.375" to 38" wide x 27.31" to 28" deep x 16.75" below counter
  • 39" wide x 28.94" long x 17.21" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional bun pans are sold separately
Refrigerator, Drop-In Frost Top, 3 Bun Pan Size, FTB-3 by Hatco. Refrigerator, Drop-In "Slim-Line" Frost Top, 3 Bun Pan Size, FTB-S3 by Hatco. Refrigerator, Drop-In "Slim-Line" Frost Top, 2 Bun Pan Size, FTB-S2 by Hatco.

Hatco - Refrigerator, Drop-In Frost Top, 3 Bun Pan Size - FTB-3


    Convenience meets style with this Hatco Drop-In Frost Top. Perfect for quick-turn products on self-serve buffets like snacks, hors d’oeuvres, side dishes, desserts... truly a unit for breakfast, lunch, and dinner. Sturdy construction and easy clean-up while keeping things cool.


  • The Hatco Frost Top units hold full-size sheet pans and other flat-bottom serving containers, helping to keep food products cool and fresh
  • For easy and flexible installation, the condensing unit may be rotated 90 or 180
  • Mobile condensing unit can be movable 3" increments
  • The electronic adjustable temperature control can be mounted to either side of the condensing unit or remotely up to four feet from the unit
  • 1" NPT drain. Drain plumbing to be installed per local codes
  • Accommodates full-size and half-size sheet pans
  • Long, flexible refrigerant line (ability to pullout condensing unit) for service
  • Lighted On/Off rocker switch
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 55.375" to 56" wide x 27.31" to 28" deep x 16.75" below counter
  • 57" wide x 28.94" long x 17.21" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional bun pans are sold separately

Hatco - Refrigerator, Drop-In "Slim-Line" Frost Top, 3 Bun Pan Size - FTB-S3


    Convenience meets style with this Hatco Drop-In Frost Top. Perfect for quick-turn products on self-serve buffets like snacks, hors d’oeuvres, side dishes, desserts... truly a unit for breakfast, lunch, and dinner. Sturdy construction and easy clean-up while keeping things cool.


  • The Hatco Frost Top units hold full-size sheet pans and other flat-bottom serving containers, helping to keep food products cool and fresh
  • For easy and flexible installation, the condensing unit may be rotated 90 or 180
  • Mobile condensing unit can be movable 3" increments
  • The electronic adjustable temperature control can be mounted to either side of the condensing unit or remotely up to four feet from the unit
  • 1" NPT drain. Drain plumbing to be installed per local codes
  • Accommodates full-size and half-size sheet pans
  • Long, flexible refrigerant line (ability to pullout condensing unit) for service
  • Lighted On/Off rocker switch
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 79.19" to 79.875" wide x 19.44" to 20.125" deep x 16.75" below counter
  • 80.81" wide x 21.06" long x 17.21" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional bun pans are sold separately

Hatco - Refrigerator, Drop-In "Slim-Line" Frost Top, 2 Bun Pan Size - FTB-S2


    Convenience meets style with this Hatco Drop-In Frost Top. Perfect for quick-turn products on self-serve buffets like snacks, hors d’oeuvres, side dishes, desserts... truly a unit for breakfast, lunch, and dinner. Sturdy construction and easy clean-up while keeping things cool.


  • The Hatco Frost Top units hold full-size sheet pans and other flat-bottom serving containers, helping to keep food products cool and fresh
  • For easy and flexible installation, the condensing unit may be rotated 90 or 180
  • Mobile condensing unit can be movable 3" increments
  • The electronic adjustable temperature control can be mounted to either side of the condensing unit or remotely up to four feet from the unit
  • 1" NPT drain. Drain plumbing to be installed per local codes
  • Accommodates full-size and half-size sheet pans
  • Long, flexible refrigerant line (ability to pullout condensing unit) for service
  • Lighted On/Off rocker switch
  • Optimal insulation on sides and bottom to ensure better cold retention
  • Cutout dimensions: 53.31" to 54" wide x 19.44" to 20.125" deep x 16.75" below counter
  • 54.94" wide x 21.06" long x 17.21" high
  • 120V 6.7 Amps . NEMA 5-15P
  • UL, CUL, NSF listed
  • One year parts and labor warranty
  • Optional bun pans are sold separately
Cold Food Pan, 1 Pan Drop-In, Refrigerated - 115V, DIRCP-1 by Advance Tabco Cold Food Pan, 2 Pan Drop-In, Refrigerated - 115V, DIRCP-2 by Advance Tabco Cold Food Pan, 3 Pan Drop-In, Refrigerated - 115V, DIRCP-3 by Advance Tabco

Advance Tabco - Cold Food Pan, 1 Pan Drop-In, Refrigerated - 115V - DIRCP-1


    Drop-in Cold pan units can be placed in existing countertops and other work areas to house items that need to be kept ice cooled. Perfect for cold bar items such as bottle drinks or salad bar items.


  • High nominal cooling capacity. (1500 btu) for guaranteed product temperature control
  • Aluminum encased copper tube evaporator panels improve heat transfer by increasing contact area
  • This increases operating efficiency and reduces power consumption
  • Expansion valve for efficient operation at various temperature conditions
  • Refrigerant filter drier to insure cleanliness of sealed refrigeration circuit
  • Sight glass to insure a properly charged refrigeration system
  • Liquid receiver for improved refrigerant charge control
  • Low running current suitable for any 115 volt circuit Precision
  • electronic thermostat for exact temperature control
  • Includes adapter bars for use with standard 12” x 20” pans
  • TOP: 18 gauge, #304 stainless steel, with extruded black polyethylene thermal breaker marine edge
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • LINER: Constructed of 18 gauge, #304 stainless steel, with 3” recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a 1/4” radius.
  • Liner is pitched towards a 1” I.P.S. drain
  • REFRIGERATION SYSTEM: The compressor is housed in a 16 gauge galvanized under structure, fabricated from formed angles and bolted to the galvanized jacket.
  • The fully self contained condensing unit is provided with a hermetically sealed compressor with a digital, programmable thermostat. The system is fully charged with environmentally friendly R404-A refrigerant
  • ELECTRICAL: Unit will be wired for 15 amps, 120V, single phase operation with an on/off thermostat switch.
  • 6 ft. long, 3 wire cord with a NEMA 5-15P plug is provided
  • 1-3 Well Units: 115v, 8 Amps, 60 Hz, 1/4 HP
  • CUT-OUT DIMENSIONS: 18 5/8" x 25 1/2"
  • OVERALL DIMENSIONS: 20" x 26 3/4" x 23 3/4" high (w/Compressor)
  • Failure to provide adequate air intake and exhaust will void any warranty coverage on the unit.
  • ETL listed

Advance Tabco - Cold Food Pan, 2 Pan Drop-In, Refrigerated - 115V - DIRCP-2


    Drop-in Cold pan units can be placed in existing countertops and other work areas to house items that need to be kept ice cooled. Perfect for cold bar items such as bottle drinks or salad bar items.


  • High nominal cooling capacity. (1500 btu) for guaranteed product temperature control
  • Aluminum encased copper tube evaporator panels improve heat transfer by increasing contact area
  • This increases operating efficiency and reduces power consumption
  • Expansion valve for efficient operation at various temperature conditions
  • Refrigerant filter drier to insure cleanliness of sealed refrigeration circuit
  • Sight glass to insure a properly charged refrigeration system
  • Liquid receiver for improved refrigerant charge control
  • Low running current suitable for any 115 volt circuit
  • Electronic thermostat for exact temperature control
  • Includes adapter bars for use with standard 12” x 20” pans
  • TOP: 18 gauge, #304 stainless steel, with extruded black polyethylene thermal breaker marine edge
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • LINER: Constructed of 18 gauge, #304 stainless steel, with 3” recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a 1/4” radius.
  • Liner is pitched towards a 1” I.P.S. drain
  • REFRIGERATION SYSTEM: The compressor is housed in a 16 gauge galvanized under structure, fabricated from formed angles and bolted to the galvanized jacket.
  • The fully self contained condensing unit is provided with a hermetically sealed compressor with a digital, programmable thermostat. The system is fully charged with environmentally friendly R404-A refrigerant
  • ELECTRICAL: Unit will be wired for 15 amps, 120V, single phase operation with an on/off thermostat switch.
  • 6 ft. long, 3 wire cord with a NEMA 5-15P plug is provided
  • CUT-OUT DIMENSIONS: 32 1/8" x 25 1/2"
  • OVERALL DIMENSIONS: 33 1/2" x 26 3/4" x 23 3/4" high (w/Compressor)
  • Failure to provide adequate air intake and exhaust will void any warranty coverage on the unit. Food should be pre-chilled to maintain the proper temperatures
  • ETL listed

Advance Tabco - Cold Food Pan, 3 Pan Drop-In, Refrigerated - 115V - DIRCP-3


    Drop-in Cold pan units can be placed in existing countertops and other work areas to house items that need to be kept ice cooled. Perfect for cold bar items such as bottle drinks or salad bar items.


  • High nominal cooling capacity. (1500 btu) for guaranteed product temperature control
  • Aluminum encased copper tube evaporator panels improve heat transfer by increasing contact area
  • This increases operating efficiency and reduces power consumption
  • Expansion valve for efficient operation at various temperature conditions
  • Refrigerant filter drier to insure cleanliness of sealed refrigeration circuit
  • Sight glass to insure a properly charged refrigeration system
  • Liquid receiver for improved refrigerant charge control
  • Low running current suitable for any 115 volt circuit Precision
  • electronic thermostat for exact temperature control
  • Includes adapter bars for use with standard 12” x 20” pans
  • TOP: 18 gauge, #304 stainless steel, with extruded black polyethylene thermal breaker marine edge
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • LINER: Constructed of 18 gauge, #304 stainless steel, with 3” recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a 1/4” radius.
  • Liner is pitched towards a 1” I.P.S. drain
  • REFRIGERATION SYSTEM: The compressor is housed in a 16 gauge galvanized under structure, fabricated from formed angles and bolted to the galvanized jacket.
  • The fully self contained condensing unit is provided with a hermetically sealed compressor with a digital, programmable thermostat. The system is fully charged with environmentally friendly R404-A refrigerant
  • ELECTRICAL: Unit will be wired for 15 amps, 120V, single phase operation with an on/off thermostat switch.
  • 6 ft. long, 3 wire cord with a NEMA 5-15P plug is provided
  • 1-3 Well Units: 115v, 8 Amps, 60 Hz, 1/4 HP
  • CUT-OUT DIMENSIONS: 45 5/8" x 25 1/2"
  • OVERALL DIMENSIONS: 47" x 26 3/4" x 23 3/4" high (w/Compressor)
  • Failure to provide adequate air intake and exhaust will void any warranty coverage on the unit. Food should be pre-chilled to maintain the proper temperatures
  • ETL listed
Cold Food Pan, 4 Pan Drop-In, Refrigerated - 115V, DIRCP-4 by Advance Tabco Cold Food Pan, 5 Pan Drop-In, Refrigerated - 115V, DIRCP-5 by Advance Tabco Food Warmer, Drop-In, (1) Full Size Pan - 120V, DISW-1 by Advance Tabco

Advance Tabco - Cold Food Pan, 4 Pan Drop-In, Refrigerated - 115V - DIRCP-4


    Drop-in Cold pan units can be placed in existing countertops and other work areas to house items that need to be kept ice cooled. Perfect for cold bar items such as bottle drinks or salad bar items.


  • High nominal cooling capacity. (1500 btu) for guaranteed product temperature control
  • Aluminum encased copper tube evaporator panels improve heat transfer by increasing contact area
  • This increases operating efficiency and reduces power consumption
  • Expansion valve for efficient operation at various temperature conditions
  • Refrigerant filter drier to insure cleanliness of sealed refrigeration circuit
  • Sight glass to insure a properly charged refrigeration system
  • Liquid receiver for improved refrigerant charge control
  • Low running current suitable for any 115 volt circuit Precision
  • electronic thermostat for exact temperature control
  • Includes adapter bars for use with standard 12” x 20” pans
  • TOP: 18 gauge, #304 stainless steel, with extruded black polyethylene thermal breaker marine edge
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • LINER: Constructed of 18 gauge, #304 stainless steel, with 3” recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a 1/4” radius.
  • Liner is pitched towards a 1” I.P.S. drain
  • REFRIGERATION SYSTEM: The compressor is housed in a 16 gauge galvanized under structure, fabricated from formed angles and bolted to the galvanized jacket.
  • The fully self contained condensing unit is provided with a hermetically sealed compressor with a digital, programmable thermostat. The system is fully charged with environmentally friendly R404-A refrigerant
  • ELECTRICAL: Unit will be wired for 15 amps, 120V, single phase operation with an on/off thermostat switch.
  • 6 ft. long, 3 wire cord with a NEMA 5-15P plug is provided
  • 4-6 Well Units: 115v, 8 Amps, 60 Hz, 1/3 HP
  • CUT-OUT DIMENSIONS: 59 1/8" x 25 1/2"
  • OVERALL DIMENSIONS: 60 1/2" x 26 3/4" x 23 3/4" high (w/Compressor)
  • Failure to provide adequate air intake and exhaust will void any warranty coverage on the unit. Food should be pre-chilled to maintain the proper temperatures
  • ETL listed

Advance Tabco - Cold Food Pan, 5 Pan Drop-In, Refrigerated - 115V - DIRCP-5


    Drop-in Cold pan units can be placed in existing countertops and other work areas to house items that need to be kept ice cooled. Perfect for cold bar items such as bottle drinks or salad bar items.


  • High nominal cooling capacity. (1500 btu) for guaranteed product temperature control
  • Aluminum encased copper tube evaporator panels improve heat transfer by increasing contact area
  • This increases operating efficiency and reduces power consumption
  • Expansion valve for efficient operation at various temperature conditions
  • Refrigerant filter drier to insure cleanliness of sealed refrigeration circuit
  • Sight glass to insure a properly charged refrigeration system
  • Liquid receiver for improved refrigerant charge control
  • Low running current suitable for any 115 volt circuit Precision
  • electronic thermostat for exact temperature control
  • Includes adapter bars for use with standard 12” x 20” pans
  • TOP: 18 gauge, #304 stainless steel, with extruded black polyethylene thermal breaker marine edge
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • LINER: Constructed of 18 gauge, #304 stainless steel, with 3” recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a 1/4” radius.
  • Liner is pitched towards a 1” I.P.S. drain
  • REFRIGERATION SYSTEM: The compressor is housed in a 16 gauge galvanized under structure, fabricated from formed angles and bolted to the galvanized jacket.
  • The fully self contained condensing unit is provided with a hermetically sealed compressor with a digital, programmable thermostat. The system is fully charged with environmentally friendly R404-A refrigerant
  • ELECTRICAL: Unit will be wired for 15 amps, 120V, single phase operation with an on/off thermostat switch.
  • 6 ft. long, 3 wire cord with a NEMA 5-15P plug is provided
  • 5 Well Units: 115v, 8 Amps, 60 Hz, 1/3 HP
  • CUT-OUT DIMENSIONS: 72 5/8" x 25 1/2"
  • OVERALL DIMENSIONS: 74" x 26 3/4" x 23 3/4" high (w/Compressor)
  • Failure to provide adequate air intake and exhaust will void any warranty coverage on the unit. Food should be pre-chilled to maintain the proper temperatures
  • ETL listed

Advance Tabco - Food Warmer, Drop-In, (1) Full Size Pan - 120V - DISW-1

  • Fiberglass insulation between each compartment on multi-pan units
  • 12” x 20” die stamped openings
  • Full stainless steel construction inside and out.
  • Remote control panel
  • Units are supplied with drains for wet or dry application
  • Includes 1” I.P.S. Drain(s)
  • TOP: 18 gauge #304 stainless steel with die stamped pan openings and self rimmed. (12” x 20” opening)
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • BODY: 20 gauge galvanized
  • ELECTRICAL: Unit will be wired for 9.17 amps, 120V, single phase operation
  • Infinite control knobs
  • Indicator lights
  • Unit to be hard wired in the field.
  • CUT-OUT DIMENSIONS: 23 5/8" x 17 1/4"
  • OVERALL DIMENSIONS: 18 3/16" x 26 3/4" x 10" high
  • UL, NSF listed
  • Food placed in tables should already be hot and the table will maintain the proper temperatures
Food Warmer, Drop-In, (2) Full Size Pans - 120V, DISW-2 by Advance Tabco Food Warmer, Drop-In, (3) Full Size Pans - 120V, DISW-3 by Advance Tabco Food Warmer, Drop-In, (4) Full Size Pans - 240V, DISW-4 by Advance Tabco

Advance Tabco - Food Warmer, Drop-In, (2) Full Size Pans - 120V - DISW-2

  • Fiberglass insulation between each compartment on multi-pan units
  • 12” x 20” die stamped openings
  • Full stainless steel construction inside and out.
  • Remote control panel
  • Units are supplied with drains for wet or dry application
  • Includes 1” I.P.S. Drain(s)
  • TOP: 18 gauge #304 stainless steel with die stamped pan openings and self rimmed. (12” x 20” opening)
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • BODY: 20 gauge galvanized
  • ELECTRICAL: Unit will be wired for 9.17 amps, 120V, single phase operation
  • Infinite control knobs
  • Indicator lights
  • Unit to be hard wired in the field.
  • CUT-OUT DIMENSIONS: 23 5/8" x 32 5/8"
  • OVERALL DIMENSIONS: 34 1/8" x 26 3/4" x 10" high
  • UL, NSF listed
  • Food placed in tables should already be hot and the table will maintain the proper temperatures

Advance Tabco - Food Warmer, Drop-In, (3) Full Size Pans - 120V - DISW-3

  • Fiberglass insulation between each compartment on multi-pan units
  • 12” x 20” die stamped openings
  • Full stainless steel construction inside and out.
  • Remote control panel
  • Units are supplied with drains for wet or dry application
  • Includes 1” I.P.S. Drain(s)
  • TOP: 18 gauge #304 stainless steel with die stamped pan openings and self rimmed. (12” x 20” opening)
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • BODY: 20 gauge galvanized
  • ELECTRICAL: Unit will be wired for 9.17 amps, 120V, single phase operation
  • Infinite control knobs
  • Indicator lights
  • Unit to be hard wired in the field.
  • CUT-OUT DIMENSIONS: 23 5/8" x 47 7/8"
  • OVERALL DIMENSIONS: 49 7/16" x 26 3/4" x 10" high
  • UL, NSF listed
  • Food placed in tables should already be hot and the table will maintain the proper temperatures

Advance Tabco - Food Warmer, Drop-In, (4) Full Size Pans - 240V - DISW-4

  • Fiberglass insulation between each compartment on multi-pan units
  • 12” x 20” die stamped openings
  • Full stainless steel construction inside and out.
  • Remote control panel
  • Units are supplied with drains for wet or dry application
  • Includes 1” I.P.S. Drain(s)
  • TOP: 18 gauge #304 stainless steel with die stamped pan openings and self rimmed. (12” x 20” opening)
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • BODY: 20 gauge galvanized
  • ELECTRICAL: Unit will be wired for 18 amps, 208-240V, single phase operation
  • Infinite control knobs
  • Indicator lights
  • Unit to be hard wired in the field.
  • CUT-OUT DIMENSIONS: 23 3/8" x 63 1/4"
  • OVERALL DIMENSIONS: 64 3/4" x 26 3/4" x 10" high
  • UL, NSF listed
  • Food placed in tables should already be hot and the table will maintain the proper temperatures
Food Warmer, Drop-In, (5) Full Size Pans - 240V, DISW-5 by Advance Tabco

Advance Tabco - Food Warmer, Drop-In, (5) Full Size Pans - 240V - DISW-5

  • Fiberglass insulation between each compartment on multi-pan units
  • 12” x 20” die stamped openings
  • Full stainless steel construction inside and out.
  • Remote control panel
  • Units are supplied with drains for wet or dry application
  • Includes 1” I.P.S. Drain(s)
  • TOP: 18 gauge #304 stainless steel with die stamped pan openings and self rimmed. (12” x 20” opening)
  • INSULATION: The pan is fully insulated and foamed in place with a 1 1/4” thickness on all sides and 2” thick on the bottom and enclosed with a 22 gauge galvanized steel outer jacket. This offers a lower heat gain into product
  • BODY: 20 gauge galvanized
  • ELECTRICAL: Unit will be wired for 23 amps, 208-240V, single phase operation
  • Infinite control knobs
  • Indicator lights
  • Unit to be hard wired in the field.
  • CUT-OUT DIMENSIONS: 23 3/8" x 78 1/2"
  • OVERALL DIMENSIONS: 80 1/16" x 26 3/4" x 10" high
  • UL, NSF listed
  • Food placed in tables should already be hot and the table will maintain the proper temperatures